Z+F IMAGER® 5006EX
Explosion-proof 3D laser scanner
Based on the high quality laser scanner Z+F IMAGER® 5006, Zoller + Fröhlich GmbH and DMT GmbH & Co. KG have developed an explosion proof 3D laser scanner.
The Z+F IMAGER® 5006EX pioneers surveying in underground mining and industries where explosive atmospheres occur.
The Z+F IMAGER® 5006EX is the world´s fi rst ATEX approved 3D laser scanner for use in mining and industrial applications under explosive conditions.
The Z+F IMAGER® 5006EX is class I and class II approved according to ATEX directive 94 / 9 / EG. The ATEX directive 94 /9 / EG „ Equipment and protective systems intended for use in potentially explosive atmospheres “ is a European standard. The ATEX approval for this equipment is widely accepted outside the European community as well.
Range 79 m (approx. 259 ft.)
The laser scanner has a nominal range of 79 m. This range allows it to use the scanner in the most potentially explosive atmospheres applications.
508,000 million pixels / sec
With a maximum measurement rate of 508,000 pixels/sec, the Z+F IMAGER® 5006EX is the fastest explosion proof 3D laser scanner in the market.
Field-of-view 310 ° x 360 °
The expanded field-of-view makes it possible to scan a large area and allows to complete the documentation with a small number of scanning positions.
The stand-alone concept guarantees more fl exibility. No external equipment is required to scan in the field. Because of that, additional ignition sources in explosive atmospheres are excluded.
High Data Quality
The Z+F IMAGER® 5006EX has a high angle and distance measuring accuracy, like all 3D laser scanners of the Z+F IMAGER® series. The very low measurement noise guarantees, high data quality on different surfaces and large measuring distance. Even with the fastest data acquisition, the scanner scans very accurate in the millimeter range
Z+F IMAGER® 5006EX full datasheet